PROCEDURE WHEN DRIVING RAIN

Driving rain and the good advantage for cooling system, but the same time view mirror driver with clear and slippery and wet roads can cause accidents.

There are some aspects of the user if faced with the situation.

first; related vehicle driven

Make sure there are no leaks at the bottom of the vehicle. All doors in good condition.

Make sure there is no leakage of the engine, gearbox, bearings and bearing. This causes water to leak into the high pressure stream of water while trekking.

Also make sure that the clutch system, brake system, parking brake in good condition.

Tires good condition to fully grip on the road.

Wiper, horn and elektrial system mainly divided front and rear lights and the main light vehicle working properly.

the second; measures should be taken through the driver when the road was flooded, Namely: -

Give way to heavy vehicles and estimate the height of the water to see the high limit heavy vehicle tires.

If the water level is less than one foot, driving can be done, but drivers should drive slowly. This prevents water wet sprinkle especially the engine ignition system

Avoid driving fast and in a hurry because it causes the engine to the effects of wet and other road users, especially motorcyclists and pedestrians hit by sprinkle.

After trekking roads flooded, avoid speeding because the brake system is not working properly because of the wet braking surface. To overcome this problem a few guidelines that can be made, namely:

Use gears 1 and 2 for vehicles with manual gearbox and gears 1 for automated systems.

Simultaneously press the brake pedal with the gas pedal to generate heat in the brake surface.

For 4-wheel drive, the automatic gear same as above. 5 speed limit to 15 kph and space vehicle some vehicles that are in front of you.