CARE TURBO - turbocharged ENGINE

CARE TURBO - turbocharged ENGINE

Between care or things that should be considered for the turbo engine users are:

1) Do not overboost - for a bolt on turbo engine as standard Campro or vtec, you should know the most optimal boost with the best reliability in tuning your engine.

2) Make sure the engine is turned on for a few seconds left before you turn off the engine for cooling the turbo. Here the importance of the use of a turbo timer.

3) Do not drive at top speed for too long for fear that engine durability is significantly reduced. Unless you are allowed to and get advice from a professional auto mechanic.

4) Check the oil leak in the turbo every time you service the car.

5) Check for leaks wind turbo and intercooler piping and installation is still tight and not loose

6) Always make sure the water is not dirty or clogged filter. For engines that use water mass flow MAF sensor after the water filter, water filter should not use oily cleaning kit because it will damage the MAF sensor giving incorrect readings and reduce performance or reduced engine performance at high load.

Characterized by the use of chemical cleaners is not recommended because the oil also increases your risk of becoming a dirty turbo.

7) Make sure the engine oil changed on time. Otherwise you risk to damage the turbo.

8) If you feel your engine is starting to lack of pickup and power, it is advisable for you to send your turbo to be serviced which cost slightly more than RM1000 to clean the interior and restore performane your turbo to its original condition.

9) Tune your engine at a certain time to make sure the oil consumption and engine performance at optimum levels.

That's the important care for the turbo engine. There were some additional points to keep the turbo engine that is not damaged and are in good condition. It is true that care little spoiled but turbo engine for car owners who are concerned, this is not a big problem.